Tratabilidad del efluente de una tenería usando un reactor por carga secuencial
Voir/ Ouvrir
Date
2010-06-30Palabras Clave
Tenería, SBR, Materia orgánica, NutrientesTannery, SBR, Organic matter, Nutrients
Metadatos
Afficher la notice complèteRésumé
El curtido de pieles es uno de los procesos más contaminantes
de la industria por la serie de tratamientos químicos que involucra
y el abundante volumen de agua residual que produce.
Los efluentes de las tenerías son ricos en materia orgánica, nitrógeno,
sólidos suspendidos, sales y otras sustancias inhibidoras
que afectan los procesos de nitrificación y desnitrificación.
Los reactores por carga secuencial (SBR) han demostrado
ser una buena opción de tratamiento de estos efluentes por
su flexibilidad y capacidad de soportar altas cargas de alimentación.
En este trabajo se evaluó la eficiencia de un SBR alimentado
con una mezcla de las fracciones del efluente de una
tenería provenientes de los procesos de pelambre y teñido. El
funcionamiento del sistema fue evaluado para dos tiempos de
residencia hidráulico (8 y 12 horas) y para dos niveles de concentración
del afluente (diluido con DQO máxima de 2.700
mg/L y concentrado con DQO mínima de 25.000 mg/L). Durante
el tiempo de reacción se combinaron fases anóxicas y óxicas.
Se obtuvo que sólo la concentración del afluente fue el
factor que presentó diferencia estadística en los cuatro tratamientos
aplicados, siendo mayores las remociones de contaminantes
cuando se usaron afluentes diluidos (DQO 2.700
mg/L), lográndose la mayor eliminación durante la fase anóxica.
Las remociones estuvieron en el rango de 83,3-85,0% para
DQO; 59,6-73,0% para P-PO
y 83,9-84% para Cr. La eliminación
de nitrógeno se realizó presumiblemente por asimilación
debido a que los microorganismos nitrificantes mostraron
ser los más sensibles cuando se modificaron las condiciones
de funcionamiento del reactor.
Colecciones
Información Adicional
Otros Títulos | Tratability of tannery wastewater using a sequencing batch reactor |
Correo Electrónico | carol_pire@yahoo.es. adiaz2430@hotmail.com |
Editor | SABER ULA |
ISSN | 0798-2259 |
Resumen en otro Idioma | The leather tanning is one of the most pollutant processes in the industry for the series of chemical treatments that involves and the abundant volume of residual water produced. Tanneries wastewaters are rich in organic matter, nitrogen, solid suspended, salts and other inhibiting substances that affect the processes of nitrificación and desnitrificación. Sequential batch reactors (SBR) have demonstrated to be a good option for treatment of this effluent because they have flexibility and manage high load charges. The objetive of this work was evaluated the efficiency of a SBR fed on a mixture of two fractions of the tannery wastewater, soak liquour and dyeing effluent. The functioning of the system was evaluated for two hydraulic residence time (8 and 12 hours) and for two levels of concentration of the influent (diluted with maximum DQO of 2700 mg/L and concentrate with minimal DQO of 25000 mg/L). During the reaction two phases were combined: anoxic and oxic. There was obtained that only the concentration of the influent was the factor that presented statistical difference in the four treatments tested, being major removals of pollutants when influents were diluted (DQO 2700 mg/L), the major elimination were achieved during the anoxic phase. The removals were in the range of 83.3-85.0% for DQO; 59.6-73.0% for P-PO and 83.9-84.0% for Cr. The elimination of nitrogen was achived presumably by assimilation, due to the fact that nitrifying bacteria were more sensitive when operation conditions were modified in the reactor. |
Colación | 284-292 |
Periodicidad | Bimestral |
País | Venezuela |
Institución | Universidad del Zulia (LUZ) Universidad de Los Andes (ULA) |
Publicación Electrónica | Revista Científica |
Sección | Revista Científica: Producción Animal |